Thermataper TT47
Product Highlights
- Available as a Thermataper TT47-K System with a premium performance Kooltherm packer board, providing a slimmer solution
- Available as a Thermataper TT47-O System with an optimum performance OPTIM-R packer board, giving the thinnest solution
- Pre-bonded tapered boards (TT47PB) are available to reduce installation time. Contact our roofing team
- Insulation and drainage in one – a practical alternative to screeding, structural falls or firrings
- Supported by a bespoke design service
More Information
- Highest quality materials
- Technical expertise
- Outstanding customer service
Thermataper TT47 is a high performance tapered insulation. It is designed to enhance water drainage for flat roofs waterproofed with fully adhered single-ply, partially bonded built-up felt, mastic asphalt, and cold liquid applied waterproofing. Thermataper TT47 comes with a supporting design service. This ensures that the most cost-effective solution for a roof is identified and that the end result is a tapered system design that meets the roof’s rainwater run-off and insulation requirements.
Related products
-
InsulationPowerdeck F
Powerdeck® F is compatible with multiple waterproofing systems, benefiting from high compressive strength and excellent dimensional stability. This ensures the flat surface finish required for optimum performance in new build and refurbishment projects. Both sides of Powerdeck® F are faced with a mineral coated glass fleece. Available Dimensions:- 1200x600mm
- 30mm-150mm
-
InsulationEurothane Eurodeck
Eurothane® Eurodeck is a thermal insulation board for use in warm flat roofs under mechanically fixed single-ply membrane waterproofing systems.
Eurothane® Eurodeck is compatible with mechanically fixed single-ply systems, benefiting from high compressive strength and excellent dimensional stability that ensures the flat surface finish required for optimum performance in new build and refurbishment projects. It is faced on both sides with a multi-layer coated aluminium foil.
Available Dimensions:- 2400x1200mm
- 25-160mm
-
InsulationThermaroof TR24
Thermaroof TR24 is a high performance PIR insulation board for flat roofs, offering a thermal conductivity of 0.024 - 0.027 W/mK. It is compatible with the majority of torch applied waterproofing systems. Suitable for both new build and refurbishment projects, Thermaroof TR24 is easy to handle and install. -
InsulationRecticel Eurothane® GP
- Suitable for multiple applications
- Good thermal performance: λ = 0.022 W/mK
- Quick and easy installation
-
InsulationEurothane PL
Insulation and plasterboard in one single, handy board for internal wall insulation and pitched roof applications.
Suitable for mechanical fixing or dot and dab fixing, this insulated board is consistently sized with extremely tight tolerances, ensuring thermal bridging is minimised. Factory bonded, the plasterboard provides optimum board dimensions and optimum adhesion between layers.
Insulation thickness Thermal Resistance Value: (m²K/W) 25 mm 1.15 40 mm 1.85 50 mm 2.30 65 mm 3.00 -
InsulationEco-Cavity
Eco-Cavity is a partial fill cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity is ideal for use with masonry walls and can achieve good levels of thermal performance in thinner constructions whilst maintaining a clear residual air gap. -
InsulationInno-Torch
Part of the Building Innovation product range, Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks. With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions.