Marley Concrete plain arris hip
Function and compatibility
•Traditional hip fitting for concrete plain tiles
•Suitable for roof pitches between 35 and 40 degrees
•Available in a range of colours
More Information
- Highest quality materials
- Technical expertise
- Outstanding customer service
Related products
-
Pitched RoofingMarley Concrete 325mm pascoll roll baby ridge
Function and compatibility •325mm pascoll roll ridge fitting •Suitable for roof pitches 15 and 50 degrees •Available in a range of colours -
Pitched RoofingRose Roofing Bitumen Ridge
BITUMEN RIDGE FOR USE WITH BITUMEN ROOF SHEETS CAN BE USED AS RIDGES OR VERGES AND ARE 850MM LONG WITH 200MM COVER EITHER SIDE. THE COVER LENGTH IS 800MM WHEN OVERLAPPING ONTO ANOTHER RIDGE. THE RIDGES ARE MADE FROM THE SAME MATERIAL AS THE CORRUGATED BITUMEN ROOF SHEETS. IT IS FLEXIBLE SO IT CAN BE EASILY ADJUSTED TO SUIT YOUR ROOF ANGLE. -
Pitched RoofingMarley Clay Club feature tile
Marley feature tiles should only be used with roof pitches of 70° and below, bands of feature tiles should be confined to a maximum of four courses. These bands must then be separated by a minimum of four courses of standard Plain Tiles. These measures are designed to reduce the risk of water ingress and wind uplift caused by the reduced tile head-lap inherent with these tiles. Ridges, hips, valleys and verges are the most vulnerable points of any roof and therefore careful detailing in respect of feature tiles should be considered. It is advised that Feature bands of tiling should be avoided directly adjacent to Bonnet/Arris hips, valley tiles or verges. Feature tiles should terminate against a standard Plain Tile at least two tile widths away from detailing/fitting. To assist in maintaining a broken bond pattern Feature tiles are available in both standard tile and tile-and-a-half formats. -
Pitched RoofingPenrhyn Welsh Slate Roofing
WHICH GRADE OF PENRHYN WELSH SLATE DO YOU NEED?
Penrhyn Welsh Slate roofing is available in three thickness grades: Capital, County, and Celtic. The thickness of the three specific grades is to suite the range of different roofing project requirements. The quality of the stone will allow production of roofing slates in excess of 1 metre in length, but the majority of the production is focused on the core production sizes (500 x 300 mm, 400 x 250 mm and 300 x 200 mm) in three thickness grades; Capital (5.5 mm), County (7 mm), and Celtic (9mm). Each grade of slate has a subtly differing character, but all have the intrinsic quality that makes Penrhyn® Slate the envy of the slate world.
