Clay 305mm fleur de lys finial
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
More Information
- Highest quality materials
- Technical expertise
- Outstanding customer service
Related products
-
Pitched RoofingMarley – Acme Double Camber
A truly unique double camber profile that accentuates the light and shade throughout each day. Accreditation to the BES 6001 framework standard for 'Responsible Sourcing' means that projects using our clay tiles can now achieve extra credits under BREEAM. No other manufacturer in the UK has a clay double camber plain tile making this Acme tile truly unique. Acme double camber clay plain tiles have both a longitudinal and latitudinal camber, which accentuates light and shade and creates highly textured roofscapes. Colour Availability:- Dark Brindle (S)
- Antique (F)
- Burnt Flame (S)
- Smooth Brindle (S)
-
Pitched RoofingRose Roofing Bitumen Ridge
BITUMEN RIDGE FOR USE WITH BITUMEN ROOF SHEETS CAN BE USED AS RIDGES OR VERGES AND ARE 850MM LONG WITH 200MM COVER EITHER SIDE. THE COVER LENGTH IS 800MM WHEN OVERLAPPING ONTO ANOTHER RIDGE. THE RIDGES ARE MADE FROM THE SAME MATERIAL AS THE CORRUGATED BITUMEN ROOF SHEETS. IT IS FLEXIBLE SO IT CAN BE EASILY ADJUSTED TO SUIT YOUR ROOF ANGLE. -
Pitched RoofingClay Plain Roof Tiles
Plain tiles made from clay have been used to cover roofs in Britain for over eight hundred years and they form much of the character of the roofs seen in the South East of England and the Midlands, where the largest deposits of clay are located. Our extensive range contains colour, texture and camber options which meet the aesthetic and performance demands of all types of roofing applications. -
Pitched RoofingMarley Concrete 325mm pascoll roll baby ridge
Function and compatibility •325mm pascoll roll ridge fitting •Suitable for roof pitches 15 and 50 degrees •Available in a range of colours -
Pitched RoofingMarley Clay Club feature tile
Marley feature tiles should only be used with roof pitches of 70° and below, bands of feature tiles should be confined to a maximum of four courses. These bands must then be separated by a minimum of four courses of standard Plain Tiles. These measures are designed to reduce the risk of water ingress and wind uplift caused by the reduced tile head-lap inherent with these tiles. Ridges, hips, valleys and verges are the most vulnerable points of any roof and therefore careful detailing in respect of feature tiles should be considered. It is advised that Feature bands of tiling should be avoided directly adjacent to Bonnet/Arris hips, valley tiles or verges. Feature tiles should terminate against a standard Plain Tile at least two tile widths away from detailing/fitting. To assist in maintaining a broken bond pattern Feature tiles are available in both standard tile and tile-and-a-half formats.
