Showing 1–16 of 154 results
-
Roof Windows
EDJ/EKJ
- For recessed installation of roof windows into flat or profiled roofing material up to 90mm in profile
- EDJ 2000 version includes BDX insulation collar as standard
- Suitable for 20°-90°
-
Roof Windows
EDW/EBW/EKW
- For standard installation of roof windows in flat or profiled roofing material up to 120mm in profile
- Also for interlocking slate, thatch and profiled sheeting
- Suitable for 15°-90° roof pitches
-
Roof Windows
- For standard installation of roof windows in plain tiles (max length 300mm)
- Maximum tile thickness of 14mm
- Suitable for 25°-90° roof pitches
-
Flat Roofing
GLASDAN 800 P PERFORADO (20x1) is a glass fibre perforated venting underlay. Finished with a specifically engineered torch-on polyethylene film on both sides.
GLASDAN 800 P PERFORADO (20×1) is a glass fibre perforated venting underlay. Finished with a specifically engineered torch-on polyethylene film on both sides.
-
Flat Roofing
1.5 mm PVC-P single ply membrane, reinforced with polyester net carrier. The DANOPOL "+" range has an enhanced formula with improved weather and UV radiation resistance properties. This formula also integrates a biocide that keeps the membrane protected against a wide range of harmful microorganisms.
Advantages & Benefits
- It absorbs structural movements efficiently , resisting the stresses resulting from large spans and the high expansions of deck roofs.
- High tensile strength.
- High resistance to piercing.
- Great elasticity.
- High dimensional stability.
- High resistance to tearing.
-
Flat Roofing
Single Ply PVC-p 1.8 mm membrane. Mechanically Fixed.
1.8 mm PVC-P single ply membrane, reinforced with polyester net carrier. The DANOPOL "+" range has an enhanced formula with improved weather and UV radiation resistance properties. This formula also integrates a powerful hat keeps the membrane protected against a wide range of harmful microorganisms.
Advantages & Benefits
- It absorbs structural movements efficiently , resisting the stresses resulting from large spans and the high expansions of deck roofs.
- High tensile strength.
- High resistance to piercing.
- Great elasticity.
- High dimensional stability.
- High resistance to tearing.
-
Flat Roofing
High Performance SBS elastomeric 5,6 kg/m² capping sheet. Torch Applied.
Bituminous SBS modified capsheet reinforced with a heavy non-woven polyester felt. The upper surface is finished with mineral chipping. The underside has a quick-melt thermofusible film. Designed for torch-applied applications and Safe2Torch details using hot-air.
Advantages & Benefits
- High movement capability.
- The higher grammage of the polyester reinforcement gives the sheet higher mechanical performance in tensile, static and dynamic piercing.
- Suitable for waterproofing buried structures (basement walls).
- Suitable for waterproofing structures subject to vehicular traffic (road and railway decks, rolling and carpark roofs,, etc.) with a favourable technical evaluation (check relevant certifications).
- High tensile strength and high elongation at break.
- High resistance to static and dynamic piercing.
- Rot-proof.
-
Flat Roofing
Bituminous SBS modified capsheet reinforced with a heavy non-woven polyester felt. The upper surface is finished with mineral chipping. The underside has a quick-melt thermofusible film. Designed for torch-applied applications and Safe2Torch details using hot-air.
Advantages & Benefits
- High movement capability.
- Helps to increase the durability of the sheet.
- It retains its properties better over time.
- It has a heavy polyester felt reinforcement, heavier than LBM-(SBS)-50/G-FP sheets.
- The higher grammage of the polyester reinforcement gives the sheet higher mechanical performance in tensile, static and dynamic piercing and tearing.
- A membrane for instances where high waterproofing performance is required.
- High dimensional stability.
- High tensile strength and high elongation at break.
- High resistance to static and dynamic piercing.
- Rot-proof.
-
Flat Roofing
High quality bituminous SBS modified capsheet reinforced with a heavy non-woven polyester felt. The upper surface is finished with mineral chippings. The underside has a quick-melt thermofusible film. Designed for torch-applied applications and Safe2Torch details using hot-air welding.
Advantages & Benefits
- Long life expectancy.
- High dimensional stability.
- High tensile strength and high elongation at break.
- High resistance to tearing.
- High resistance to static and dynamic piercing.
- Total impermeability to water and water vapour.
- Rot-proof.
- Very stable in the long term.
-
Pitched Roofing
Function and compatibility
- Traditional hip finishing fitting
- Available in a range of colours
-
Pitched Roofing
Function and compatibility
•Traditional hip fitting for concrete plain tiles
•Suitable for roof pitches between 35 and 40 degrees
•Available in a range of colours
-
Pitched Roofing
Function and compatibility
•325mm pascoll roll ridge fitting
•Suitable for roof pitches 15 and 50 degrees
•Available in a range of colours
-
Pitched Roofing
Marley feature tiles should only be used with roof pitches of 70° and below, bands of feature tiles should be confined to a maximum of four courses. These bands must then be separated by a minimum of four courses of standard Plain Tiles. These measures are designed to reduce the risk of water ingress and wind uplift caused by the reduced tile head-lap inherent with these tiles.
Ridges, hips, valleys and verges are the most vulnerable points of any roof and therefore careful detailing in respect of feature tiles should be considered. It is advised that Feature bands of tiling should be avoided directly adjacent to Bonnet/Arris hips, valley tiles or verges. Feature tiles should terminate against a standard Plain Tile at least two tile widths away from detailing/fitting. To assist in maintaining a broken bond pattern Feature tiles are available in both standard tile and tile-and-a-half formats.
Function and compatibility
- External angles for vertical tiling
- Available in left and right hand versions
- Available in a range of colours
-
Pitched Roofing
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
-
Pitched Roofing
- Suitable for roof pitches from 30 to 45 degrees
- Available in a range of colours
-
Pitched Roofing
- 305mm angled ridge fitting
- Compatible with RidgeFast ventilated dry ridge system
- Suitable for roof pitches from 30 to 45 degrees