Showing 17–32 of 162 resultsSorted by latest
-
Flat Roofing
High quality bituminous SBS modified capsheet reinforced with a heavy non-woven polyester felt. The upper surface is finished with mineral chippings. The underside has a quick-melt thermofusible film. Designed for torch-applied applications and Safe2Torch details using hot-air welding.
Advantages & Benefits
- Long life expectancy.
- High dimensional stability.
- High tensile strength and high elongation at break.
- High resistance to tearing.
- High resistance to static and dynamic piercing.
- Total impermeability to water and water vapour.
- Rot-proof.
- Very stable in the long term.
-
Pitched Roofing
Function and compatibility
- Traditional hip finishing fitting
- Available in a range of colours
-
Pitched Roofing
Function and compatibility
•Traditional hip fitting for concrete plain tiles
•Suitable for roof pitches between 35 and 40 degrees
•Available in a range of colours
-
Pitched Roofing
Function and compatibility
•325mm pascoll roll ridge fitting
•Suitable for roof pitches 15 and 50 degrees
•Available in a range of colours
-
Pitched Roofing
Marley feature tiles should only be used with roof pitches of 70° and below, bands of feature tiles should be confined to a maximum of four courses. These bands must then be separated by a minimum of four courses of standard Plain Tiles. These measures are designed to reduce the risk of water ingress and wind uplift caused by the reduced tile head-lap inherent with these tiles.
Ridges, hips, valleys and verges are the most vulnerable points of any roof and therefore careful detailing in respect of feature tiles should be considered. It is advised that Feature bands of tiling should be avoided directly adjacent to Bonnet/Arris hips, valley tiles or verges. Feature tiles should terminate against a standard Plain Tile at least two tile widths away from detailing/fitting. To assist in maintaining a broken bond pattern Feature tiles are available in both standard tile and tile-and-a-half formats.
Function and compatibility
- External angles for vertical tiling
- Available in left and right hand versions
- Available in a range of colours
-
Pitched Roofing
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
-
Pitched Roofing
- Suitable for roof pitches from 30 to 45 degrees
- Available in a range of colours
-
Pitched Roofing
- 305mm angled ridge fitting
- Compatible with RidgeFast ventilated dry ridge system
- Suitable for roof pitches from 30 to 45 degrees
-
Pitched Roofing
- 305mm half round ridge fitting
- Suitable for roof pitches 30 and 60 degrees
- Compatible with RidgeFast ventilated dry ridge system
- Available in a range of colours
-
Pitched Roofing
- Simple, fast installation
- For use with both dry fix and mortar based systems
- Suitable for roof pitches from 30 to 60 degrees
- Available in a range of colours
- Image is displayed in Burnished
- Prevents ingress of birds, vermin and insects
-
Pitched Roofing
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
-
Pitched Roofing
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
-
Pitched Roofing
- 305mm decorative ridge fitting
- Suitable for roof pitches from 30 to 60 degrees
- Compatible with Acme and Hawkins roof tiles
- Compatible with RidgeFast ventilated dry ridge system
-
Pitched Roofing
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
-
Pitched Roofing
Function and compatibility:
•Traditional concrete ridge fitting
•Suitable for roof pitches between 15 and 55°
•Available in a range of colours
•Compatible with all Marley dry ridge and hip systems
-
Pitched Roofing
BITUMEN RIDGE FOR USE WITH BITUMEN ROOF SHEETS CAN BE USED AS RIDGES OR VERGES AND ARE 850MM LONG WITH 200MM COVER EITHER SIDE. THE COVER LENGTH IS 800MM WHEN OVERLAPPING ONTO ANOTHER RIDGE. THE RIDGES ARE MADE FROM THE SAME MATERIAL AS THE CORRUGATED BITUMEN ROOF SHEETS. IT IS FLEXIBLE SO IT CAN BE EASILY ADJUSTED TO SUIT YOUR ROOF ANGLE.
- Easy to install
- Available in Green, Red, Black & Brown
- Low Weight
- High Performance
- Maintenance-Free
