Showing 65–80 of 162 resultsSorted by latest
-
Insulation
Thermataper TT46 is a high performance tapered insulation system, providing insulation and drainage in one. It is designed to enhance water drainage for flat roofs waterproofed with mechanically fixed single-ply waterproofing. Thermataper TT46 comes with a supporting design service. This ensures that the most cost-effective solution for a flat roof is identified and that the end result is a tapered system design that meets the roof’s rainwater run-off and insulation requirements.
- Insulation and drainage in one – a practical alternative to screeding, structural falls or firrings
- Supported by a bespoke design service
- Suitable for use with most mechanically fixed single-ply waterproofing systems
- Compatible with most green roof systems
- Load bearing implications for an existing structure can be minimal
-
Insulation
As a high performance tapered insulation system, Thermataper TT44 provides insulation and drainage in one. It is designed to enhance water drainage for flat roofs waterproofed with partially bonded torch applied waterproofing. Thermataper TT44 comes with a supporting design service. This ensures that the most cost-effective solution for a flat roof is identified and that the end result is a tapered system design that meets the roof’s rainwater run-off and insulation requirements.
- Available as a Thermataper TT44-K System with a premium performance Kooltherm packer board, providing a slimmer system
- Insulation and drainage in one – a practical alternative to screeding, structural falls or firrings
- Supported by a bespoke design service
- Compatible with majority of torch applied waterproofing and green roof systems
- Load bearing implications for an existing structure can be minimal
-
Insulation
Thermaroof TR27 is a high performance flat roof insulation for use on roofs waterproofed with fully adhered single-ply, partially bonded built-up felt, mastic asphalt or cold liquid applied waterproofing. Compatible with most green roof systems, Thermaroof TR27 is easy to handle and install and ideal for both new build and refurbishment projects.
- Amongst the more thermally efficient insulation products for flat roofs
- Fully compatible with single-ply non-bituminous membranes that are fully bonded with solvent-based adhesive systems
- Fully compatible with most bitumen based and mastic asphalt waterproofing systems
- Compatible with most green roof systems
-
Insulation
Thermaroof TR26 is a high performance PIR insulation board for flat roofs, offering a thermal conductivity of 0.022 W/mK. It is fully compatible with most mechanically fixed single-ply waterproofing systems and green roof systems. Suitable for both new build and refurbishment projects, Thermaroof TR26 is easy to handle and install. Its installation technique makes it an ideal flat roof insulation solution for fast track building programmes.
- Amongst the more thermally efficient insulation products for flat roofs
- Suitable for use with most mechanically fixed single-ply waterproofing systems
- Compatible with most green roof systems
- Installation technique is suitable for fast track building programmes
-
Insulation
Thermaroof TR24 is a high performance PIR insulation board for flat roofs, offering a thermal conductivity of 0.024 - 0.027 W/mK. It is compatible with the majority of torch applied waterproofing systems. Suitable for both new build and refurbishment projects, Thermaroof TR24 is easy to handle and install.
- Amongst the more thermally efficient insulation products for flat roofs
- Compatible with the majority of torch applied waterproofing systems
- Also available as a tapered insulation system, to create the fall in the roof
- Easy to handle and install
- Pre-bonded boards (TR24PB) are available to reduce installation time. Contact our roofing team for further information
-
Insulation
Thermapitch TP10 is a high performance pitched roof insulation board, suitable for use in tiled or slated pitched roofs. Thermapitch TP10 is suitable for both new build and retrofit projects. The insulation boards are available in a range of thicknesses and are easy to cut and handle, ensuring an efficient installation process.
- Amongst the most thermally efficient commonly used insulation products for pitched roofs / attic spaces
- Suitable for creating a useable attic space or attic renovation projects
- Reduces heat loss through the roof and which can help save on energy costs
- Not susceptible to sagging over time
- Robust Details for Part E of the Building Regulations (England & Wales)
-
Insulation
The OPTIM-R E Inverted Roofing System is perfect for projects that require the lowest U-value or the thinnest roof build-up. It is ideal for where there is little space for installing new roof insulation. OPTIM-R E is encapsulated in a coating for increased robustness and easier handling on-site. The vacuum insulation panels are accompanied by rigid extruded polystyrene insulation infill panels which can be cut to fit around problem areas such as roof lights or ventilator kerbs.
- Next generation insulation with a superior level of thermal efficiency
- Ideal for constructions where a lack of construction depth or space is an issue
- Protective coating for increased robustness and easier handling
-
Insulation
Kingspan GreenGuard GG700 is a rigid extruded polystyrene (XPS) insulation. XPS has the necessary compressive strength to make it the product of choice for specialist applications such as car park decks and heavy-duty commercial, industrial and cold store flooring.
- Ideal for specialist applications, including car park decks and heavy-duty flooring
- Rigid extruded polystyrene insulation – thermal conductivities as low as 0.035 W/mK
- High compressive strength withstands vehicle loads
- Resistant to ground moisture penetration
- Easy to handle and install
-
Insulation
Kingspan GreenGuard GG500 is a rigid extruded polystyrene (XPS) insulation. XPS has the necessary compressive strength to make it the product of choice for specialist applications such as inverted roofs, basements, car park decks and heavy-duty commercial, industrial and cold store flooring.
- Ideal for specialist applications, including inverted roofs, basements, car park decks and heavy-duty flooring
- Rigid extruded polystyrene insulation – thermal conductivities as low as 0.034 W/mK
- High compressive strength withstands vehicle loads
- Minimal water absorption and resistant to ground moisture penetration
- Withstands freeze / thaw cycling
-
Insulation
Kingspan GreenGuard GG300 is a rigid extruded polystyrene (XPS) insulation. XPS has the necessary compressive strength to make it the product of choice for specialist applications such as inverted roofs, basements, car park decks and heavy-duty commercial, industrial and cold store flooring.
- Ideal for specialist applications, including inverted roofs, basements, car park decks and heavy-duty flooring
- Rigid extruded polystyrene insulation – thermal conductivity of 0.034 W/mK
- High compressive strength withstands vehicle loads
- Minimal water absorption and resistant to ground moisture penetration
- Withstands freeze / thaw cycling
- Compatible with green roof systems
-
Insulation
Part of the Building Innovation product range, Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks. With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions.
- Can be fitted with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems
- Suitable for use on new and existing concrete, timber and metal decks
- Lightweight PIR insulation boards are easy to transport, cut and install
-
Insulation
Part of the Building Innovation product range, Inno-Bond flat roof boards offer a lightweight, durable solution for new and existing flat roofs with a thermal conductivity as low as 0.024 W/mK. Inno-Bond flat roof boards are suitable for use with fully adhered single-ply waterproofing systems on concrete, metal and timber decks. Inno-Bond flat PIR roof insulation boards deliver excellent thermal performance, helping to hit target U-values with slim constructions.
- Compatible with new and refurbished roofs
- Can be fitted under fully adhered, single-ply membranes
- Suitable for use on concrete, timber and metal decks
- Rigid boards are easy to transport, cut and install
-
Insulation
Eco-Cavity Full Fill is a cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity Full Fill is ideal for use with masonry walls and is suitable where the requirement is for insulation to completely fill the cavity, whilst maintaining a residual 10 mm cavity to resist moisture transfer.
- Suitable for use in full fill cavity wall applications, allowing for optimal thermal performance to be met.
- Tongue and groove edges allow for easy installation
- Lightweight insulation – easy to transport
- High performance rigid polyisocyanurate (PIR) insulation core
- Aluminium composite foil facing to both sides
-
Insulation
Eco-Liner is an insulated plasterboard for mechanically fixed & adhesively bonded drylining systems. The insulation component has a thermal conductivity of 0.022 W/mK. This 2 in 1 board insulates and finishes walls in one application. Eco-Liner is an ideal insulation product for internal walls and pitched roofs.
- A 2 in 1 solution for insulating and drylining walls in one application, meaning only one board to cut, carry and fix
- High performance rigid polyisocyanurate (PIR) insulation core with a tapered edge 12.5mm gypsum plasterboard
- Ideal for room-in-the-roof applications, walls and cold flat roofs
- Insulation component thermal conductivity of 0.022 W/mK
-
Insulation
Eco-Cavity is a partial fill cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity is ideal for use with masonry walls and can achieve good levels of thermal performance in thinner constructions whilst maintaining a clear residual air gap.
-
- Suitable for use within partial fill cavity walls
- Air gap between the insulation and masonry outer leaf acts as a barrier to external moisture penetration
- Lightweight insulation – easy to transport
- High Performance rigid polyisocyanurate (PIR) insulation core
- Aluminium composite foil facing to both sides
-
Insulation
Eco-Versal is a 5 in 1 insulation board with a thermal conductivity of 0.022 W/mK. It is suitable for a number of different applications, including cold flat and pitched roofs, floors and timber frame construction. Eco-Versal can also be used to upgrade insulation on most internal and external walls.
- A 5 in 1 solution that’s suitable for insulating floors, walls, roofs, dormer cheeks and ceilings
- Rigid insulation board with a thin profile that’s easy to cut and install
- Lightweight insulation – easy to transport
- High performance rigid polyisocyanurate (PIR) insulation core
- Aluminium composite foil facing to both sides
