DANOSA POLYDAN 180-50/GP ELAST.

Advantages & Benefits

  • High movement capability.
  • Helps to increase the durability of the sheet.
  • It retains its properties better over time.
  • It has a heavy polyester felt reinforcement, heavier than LBM-(SBS)-50/G-FP sheets.
  • The higher grammage of the polyester reinforcement gives the sheet higher mechanical performance in tensile, static and dynamic piercing and tearing.
  • A membrane for instances where high waterproofing performance is required.
  • High dimensional stability.
  • High tensile strength and high elongation at break.
  • High resistance to static and dynamic piercing.
  • Rot-proof.

More Information

  • Check Mark Highest quality materials
  • Check Mark Technical expertise
  • Check Mark Outstanding customer service
Category:

Bituminous SBS modified capsheet reinforced with a heavy non-woven polyester felt. The upper surface is finished with mineral chipping. The underside has a quick-melt thermofusible film. Designed for torch-applied applications and Safe2Torch details using hot-air.

Related products

  • Flat Roofing

    Modi Torch 3MM Film/Film

    High quality entry point SBS modified torch-on felt. Ideal for those customers wanting a quality product, at a competitive price.
    Read more Done
  • Flat Roofing

    DANOSA GLASDAN 800 PERFORATED

    GLASDAN 800 P PERFORADO (20x1) is a glass fibre perforated venting underlay. Finished with a specifically engineered torch-on polyethylene film on both sides.
    Read more Done
  • RapidRoof PMMA Roofing System
    Flat Roofing

    RapidRoof PMMA Roofing System

    RapidRoof is LRS’ unique PMMA, high performance, rapid curing, cold liquid applied flat roof waterproofing range. With a typical curing time of 20 minutes, our Rapid Range of products is suitable for year-round application. Applied by brush or roller, RapidRoof is one of the fastest and most cost-effective waterproofing options for both commercial and residential flat roof projects. With over 200% elasticity RapidRoof is tough, yet flexible enough to deal with most roof movement, unlike rigid systems. The RapidRoof range comes with our manufacturer’s product guarantee of 10 years. It’s UV stable and typically cures within 20 minutes. RapidRoof is ideal for domestic projects or small industrial roofs and is available with an Anti-Skid finish for designated walkways, balconies or as a standalone waterproofing system. It is available in grey as standard or black if required. Application: LRS RapidRoof is designed so that it can be applied directly onto most surfaces without the need for primer. This means it can be incorporated into the building of a new roof; applied onto OSB3 boards. Alternatively used to overcoat existing old or failed membranes including; felt, asphalt, metal, GRP etc, eliminating the need for stripping the roof and disturbing the substrate, saving time and money whilst limiting disruption on site. RapidRoof is a 2-component simple to apply system and due to its liquid application and versatility to adhere to most surfaces; RapidRoof will self terminate, in most cases eliminating the requirement for flashings, new trims and expensive detailing. Its fully bonded application prevents water tracking and its seamless finish eliminates the risk inherent in jointed systems. Cold weather application – designed to cure down to 0°c RapidRoof allows application even during the coldest of weather. Suitable for application on OSB3 Roofing Boards, Old Felt, Asphalt, Concrete, Metal, Old Fibre Glass and compatible with standard GRP trims.
    Read more Done
  • Flat Roofing

    Karnak Elasto-Kote

    With a built-in Rust Inhibitor and FM approved, Elasto-Kote offers an exceptionally high performing waterproofing elastomeric system, (also compatible with spray foam insulation). It has up to 85% solar reflective system with 650% elongation. Our product is a single component, self-priming, SEBS, elastomeric, and thermoplastic. It is applied in 2 to 3 coats and comes with guarantees of up to 20 years.
    Read more Done
  • Flat Roofing

    DANOSA DANOPOL+ HS 1.8

    Single Ply PVC-p 1.8 mm membrane. Mechanically Fixed.

      1.8 mm PVC-P single ply membrane, reinforced with polyester net carrier. The DANOPOL "+" range has an enhanced formula with improved weather and UV radiation resistance properties. This formula also integrates a powerful hat keeps the membrane protected against a wide range of harmful microorganisms.
    Read more Done
  • Flat Roofing

    DANOSA DANOPOL+ HS 1.5

    1.5 mm PVC-P single ply membrane, reinforced with polyester net carrier. The DANOPOL "+" range has an enhanced formula with improved weather and UV radiation resistance properties. This formula also integrates a biocide that keeps the membrane protected against a wide range of harmful microorganisms.
    Read more Done
  • Flat Roofing

    FastCoat

    Polyurethanes are known for their exceptional strength and elastic properties, because of their specific formulation. With this in mind, our range offers complete systems for waterproofing roofs, balconies, gutters and walkways. FastCoat has fast cure technology, unlike many alternatives. It offers substantial reductions in application time, so you save significant amounts of project costs and reduce site disruption. It is typically showerproof in 30 minutes and fully cured in approximately 4 hours. This means you can complete small projects in less than a day. It is highly elastic to cope with normal roof movement. Moreover, with the addition of FastCoat Traffic Coat, it is exceptionally tough, making it ideal for balconies and walkways. FastCoat is seamless and fully bonded so it provides the best solution for green roof waterproofing.
    Read more Done