Clay 305mm fleur de lys finial
Function and compatibility
- 305mm decorative ridge fitting
- Extension piece available
- Available with either a half round or plain angle base
- Available in 90 or 105 degree angles
- Compatible with RidgeFast ventilated dry ridge system
- Available in Red Smooth and Slate Black
More Information
- Highest quality materials
- Technical expertise
- Outstanding customer service
Related products
-
Pitched RoofingMarley Clay Club feature tile
Marley feature tiles should only be used with roof pitches of 70° and below, bands of feature tiles should be confined to a maximum of four courses. These bands must then be separated by a minimum of four courses of standard Plain Tiles. These measures are designed to reduce the risk of water ingress and wind uplift caused by the reduced tile head-lap inherent with these tiles. Ridges, hips, valleys and verges are the most vulnerable points of any roof and therefore careful detailing in respect of feature tiles should be considered. It is advised that Feature bands of tiling should be avoided directly adjacent to Bonnet/Arris hips, valley tiles or verges. Feature tiles should terminate against a standard Plain Tile at least two tile widths away from detailing/fitting. To assist in maintaining a broken bond pattern Feature tiles are available in both standard tile and tile-and-a-half formats. -
Pitched RoofingClay Plain Roof Tiles
Plain tiles made from clay have been used to cover roofs in Britain for over eight hundred years and they form much of the character of the roofs seen in the South East of England and the Midlands, where the largest deposits of clay are located. Our extensive range contains colour, texture and camber options which meet the aesthetic and performance demands of all types of roofing applications. -
Pitched RoofingCwt-y-Bugail Welsh Slate Roofing
WHICH GRADE OF CWT-Y-BUGAIL WELSH SLATE DO YOU NEED?
Cwt-y-Bugail Welsh Slate roofing is available in three thickness grades: Capital, County, and Celtic. The thickness of the three specific grades is to suite the range of different roofing project requirements. The quality of the stone will allow production of roofing slates in excess of 1 metre in length, but the majority of the production is focused on the core production sizes (500 x 300 mm, 400 x 250 mm and 300 x 200 mm) in three thickness grades; Capital (5.5 mm), County (7 mm), and Celtic (9mm). Each grade of slate has a subtly differing character, but all have the intrinsic quality that makes Cwt-y-Bugail Slate the envy of the slate world. -
Pitched RoofingPenrhyn Welsh Slate Roofing
WHICH GRADE OF PENRHYN WELSH SLATE DO YOU NEED?
Penrhyn Welsh Slate roofing is available in three thickness grades: Capital, County, and Celtic. The thickness of the three specific grades is to suite the range of different roofing project requirements. The quality of the stone will allow production of roofing slates in excess of 1 metre in length, but the majority of the production is focused on the core production sizes (500 x 300 mm, 400 x 250 mm and 300 x 200 mm) in three thickness grades; Capital (5.5 mm), County (7 mm), and Celtic (9mm). Each grade of slate has a subtly differing character, but all have the intrinsic quality that makes Penrhyn® Slate the envy of the slate world.
